100014 Mini Electric Special Narrow Places Angle Grinder 3"

Katsu

  • £21.99
    Unit price per 
  • Save £6
Tax included.

Only 0 left!
Will be in stock after

  • 【Multipurpose】 Ideal for carving, grinding, cutting, etc. Works with different kinds of mini grinding wheel heads and solid carbide milling tools, grinding needles, rotary sharp files to do some grinding, milling, and polishing
  • 【Convenient】 Small, lightweight, and suitable for narrow places and for polishing and grinding molds, clamps, carved crafts, and complicated parts which are hard to process on grinding machines or professional equipment
  • 【High Quality Insulation】 Made of high-quality engineering plastics and designed for hand operation with double insulation construction. Even under the situation of basic insulation damage, it can still protect user's personal safety
  • 【Powerful】 Delivers up to 12000 rpm, and can cut soft metal sheets including iron and aluminum sheets less than 2 mm
  • 【Accessories Included】 Comes with 5 grinding discs, 2 grinding disc retainers, replacement tool fixing set, and carbon brushes

Specifications:

  • Power: 280 W
  • Current: 220 V 50 Hz
  • Wheel Bore Diameter: 16 mm
  • Bore Thickness: 11 mm
  • Wheel Size: 3 inches (75 mm)
  • Collet Size: 3 mm
  • Shaft Size: M10 x 1.0
  • No Load Speed: 12000 rpm
  • Gearhead is made of solid aluminum
  • Replacement tool fixing set and carbon brushes are included
  • For best performance and durability, the grinder should have 5 minutes of rest every 15 minutes of cutting. If you feel it's hot, you must stop the grinder
  • The grinder should have 5 minutes of rest every 1 hour of grinding

Instructions:

  1. Please pay attention to some tips before operating the electric grinder:
  2. During operation, you must wear eye shield to prevent damage from scraps of broken grinding wheel
  3. If working with ≤ 3 mm grinding head, the max speed can't exceed 15 m/s
  4. Before operating, you should trim the edge of the grinding wheel and make sure it is concentric with the grinder's axle. Otherwise, the unbalance of the grinding head may cause severe vibrations and thus obstructing the normal operating and lowering processing quality. To trim the grinding head, you can grind it with a grinding wheel, or on a waste wheel. You can judge the concentric level according to no load noise
  5. Before operating, you should check if the chuck and nut of the main axle are well fixed. The electric wire is not allowed to be damaged or squeezed from the workpiece. You should run the grinder for one minute with no load after powering on. The voltage fluctuation is not allowed to exceed 10%
  6. When moving the electric grinder, you are not allowed to pull up or draw out the wire. You must hold the main body of the grinder to move



We Also Recommend


Customer Reviews

Based on 3 reviews Write a review